OpenPilot CC3D Revolution Revo 10DOF STM32F4 Flight Controller Staight Pin for RC Drone FPV Racing Multi Rotor

OpenPilot CC3D Revolution Revo 10DOF STM32F4 Flight Controller Staight Pin for RC Drone FPV Racing Multi Rotor

YOU
SAVE US $0

  • Original PriceUS$53.04piece
  • SAVEUS $0piece
  • Discount PriceUS$53.04piece
  • ShippingFree Shipping
  • Product Rating9555
MAMBA F405 Betaflight Flight Controller F40 40A 3-6S DSHOT600 FPV Racing Brushless ESC
MAMBA F405 Betaflight Flight Controller F40 40A 3-6S DSHOT600 FPV Racing Brushless ESC
US$46.99US$42.99~46.99
Racerstar StarF4S 30A Blheli_S Dshot 4 in 1 ESC AIO F4 OSD Flight Controller w/ BEC Current Sensor
Racerstar StarF4S 30A Blheli_S Dshot 4 in 1 ESC AIO F4 OSD Flight Controller w/ BEC Current Sensor
US$69.99US$66.99~69.99
MAMBA F405 Mini Betaflight Flight Controller & F25 20A 3-4S DSHOT600 FPV Racing Brushless ESC
MAMBA F405 Mini Betaflight Flight Controller & F25 20A 3-4S DSHOT600 FPV Racing Brushless ESC
US$43.99US$37.99~43.99
Anniversary Special Edition Racerstar REV35 35A BLheli_S 3-6S 4 In 1 ESC Built-in Current Sensor for RC Drone
Anniversary Special Edition Racerstar REV35 35A BLheli_S 3-6S 4 In 1 ESC Built-in Current Sensor for RC Drone
US$28.99US$24.99~27.99
DYS Samguk Series Wei 2207 2300KV 2600KV 3-4S Brushless Motor for RC Drone FPV Racing
DYS Samguk Series Wei 2207 2300KV 2600KV 3-4S Brushless Motor for RC Drone FPV Racing
US$11.99US$9.99~11.99
Eachine Crazybee F4 PRO Flight Controller compatible Frsky/ Flysky/ DSM2/DSMX Receiver for TRASHCAN 2S Whoop FPV Racing Drone
Eachine Crazybee F4 PRO Flight Controller compatible Frsky/ Flysky/ DSM2/DSMX Receiver for TRASHCAN 2S Whoop FPV Racing Drone
US$41.99US$41.99~44.55
Emax ECO Series 2306 6S 1700KV 4S 2400KV Brushless Motor for RC Drone FPV Racing
Emax ECO Series 2306 6S 1700KV 4S 2400KV Brushless Motor for RC Drone FPV Racing
US$11.99US$11.99
Matek System F722-SE F7 Dual Gryo Flight Controller w/ OSD BEC Current Sensor Black Box for RC Drone
Matek System F722-SE F7 Dual Gryo Flight Controller w/ OSD BEC Current Sensor Black Box for RC Drone
US$45.99US$44.99~45.99
HAKRC BLHeli_32 Bit 35A 2-5S ESC Built-in LED Support Dshot1200 Multishot for FPV RC Drone
HAKRC BLHeli_32 Bit 35A 2-5S ESC Built-in LED Support Dshot1200 Multishot for FPV RC Drone
US$15.19US$7.59
Beitian BN-880 Flight Control GPS Module Dual Module Compass With Cable for RC Drone FPV Racing
Beitian BN-880 Flight Control GPS Module Dual Module Compass With Cable for RC Drone FPV Racing
US$19.99US$17.99~19.99
iFlight XING X2207 1700KV 1800KV 2450KV 2750KV 2-6S Brushless Motor for RC FPV Racing Drone
iFlight XING X2207 1700KV 1800KV 2450KV 2750KV 2-6S Brushless Motor for RC FPV Racing Drone
US$19.99US$18.99
9g 30.5x30.5mm Omnibus F4 Flight Controller AIO OSD 5V BEC Current Sensor for RC FPV Racing Drone
9g 30.5x30.5mm Omnibus F4 Flight Controller AIO OSD 5V BEC Current Sensor for RC FPV Racing Drone
US$26.39US$20.99~26.39
F3 Flight Controller Acro 6 DOF/Deluxe 10 DOF for RC Multirotor FPV Racing Drone
F3 Flight Controller Acro 6 DOF/Deluxe 10 DOF for RC Multirotor FPV Racing Drone
US$14.99US$12.99~21.99
Matek Systems BetaFlight F405-CTR Flight Controller Built-in PDB OSD 5V/2A BEC Current Sensor for RC Drone
Matek Systems BetaFlight F405-CTR Flight Controller Built-in PDB OSD 5V/2A BEC Current Sensor for RC Drone
US$41.99US$39.90~41.99
Happymodel SE0802 1-2S 16000KV 19000KV Brushless Motor for Mobula7 Snapper7 RC Drone
Happymodel SE0802 1-2S 16000KV 19000KV Brushless Motor for Mobula7 Snapper7 RC Drone
US$9.99US$9.29~9.99
HGLRC Flame 1407 3600KV 3-4S Brushless Motor for RC Drone FPV Racing
HGLRC Flame 1407 3600KV 3-4S Brushless Motor for RC Drone FPV Racing
US$11.99US$11.99
Anniversary Special Edition Martian 215 215mm Carbon Fiber RC Drone FPV Racing Frame Kit 136g
Anniversary Special Edition Martian 215 215mm Carbon Fiber RC Drone FPV Racing Frame Kit 136g
US$32.99US$20.99
HSKRC TWE210 210mm Wheelbase 4mm Arm 3K Carbon Fiber X Type FPV Racing Frame Kit for RC Drone
HSKRC TWE210 210mm Wheelbase 4mm Arm 3K Carbon Fiber X Type FPV Racing Frame Kit for RC Drone
US$19.85US$18.62~19.85
DYS Samguk Series Wu 2206 2400KV 2700KV 3-4S Brushless Motor CW for RC Drone FPV Racing
DYS Samguk Series Wu 2206 2400KV 2700KV 3-4S Brushless Motor CW for RC Drone FPV Racing
US$9.99US$9.99~10.99
Matek F405-STD BetaFlight STM32F405 Flight Controller Built-in OSD Inverter for RC Multirotor FPV Racing Drone
Matek F405-STD BetaFlight STM32F405 Flight Controller Built-in OSD Inverter for RC Multirotor FPV Racing Drone
US$38.85US$27.99

Shopping for a OpenPilot CC3D Revolution Revo 10DOF STM32F4 Flight Controller Staight Pin for RC Drone FPV Racing Multi Rotor with lower price? Read about features, types, and other must-know topics in our OpenPilot CC3D Revolution Revo 10DOF STM32F4 Flight Controller Staight Pin for RC Drone FPV Racing Multi Rotor buying guide to make an informed choice. Order best OpenPilot CC3D Revolution Revo 10DOF STM32F4 Flight Controller Staight Pin for RC Drone FPV Racing Multi Rotor Look for the OpenPilot CC3D Revolution Revo 10DOF STM32F4 Flight Controller Staight Pin for RC Drone FPV Racing Multi Rotor package that is best for you. Make a price comparison, discount promo, or free sending before shopping.

OpenPilot CC3D Revolution Revo 10DOF STM32F4 Flight Controller Staight Pin


OpenPilot CC3D Revolution Revo 10DOF STM32F4 Flight Controller Staight Pin for RC Drone FPV Racing Multi Rotor

OpenPilot CC3D Revolution Revo 10DOF STM32F4 Flight Controller Staight Pin for RC Drone FPV Racing Multi Rotor

OpenPilot CC3D Revolution Revo 10DOF STM32F4 Flight Controller Staight Pin for RC Drone FPV Racing Multi Rotor
OpenPilot CC3D Revolution Revo 10DOF STM32F4 Flight Controller Staight Pin for RC Drone FPV Racing Multi Rotor
OpenPilot CC3D Revolution Revo 10DOF STM32F4 Flight Controller Staight Pin for RC Drone FPV Racing Multi Rotor


The OpenPilot Revolution board, also called ‘Revo’, is a new breed of Autopilot using the STM32F4 Micro-controller. This is important as it contains a hardware floating point unit (FPU), which is a huge advancement for hobby-class autopilots. Of course, OpenPilot has been 32bit since day one, and the FPU is another step up the performance ladder.
The Revolution is a flight control computer with autopilot, intended for multirotors, helicopters and fixed wings. It is a full 10DOF with gyroscope, accelerometer, magnetometer and pressure sensors.
Technical description:
Technical description
CPU

CPU is the STM32F405RGT6 chip, with ARM Cortex-M4 core at 210MIPS, FPU, and saturation arithmetics DSP functions.
The chip features a range of built-in hardware modules that can bo programmed once and function independently, requiring little to no CPU overhead. These include 14x multichanel timers, 3x synchronous-sampling ADC serving up to 24 channels, 2x DAC, matrix memory controller with 16-stream DMA, and other. Communication modules include USB2.0, 3x I2C, 3x SPI, 4x USART, 2x CAN and SIDO. All these modules can be configured for accessing the chip pins using a flexible switch matrix, or disabled to save power.
It even contains a real time hardware calendar if you want a wake up flight.
The software and settings are loaded through USB connector and no-hassle update function in the GCS (Ground Control Station).
MPU: 6000
ModemThe board features a built-in 433MHz OPLink Modem.
DimensionsOpenPilot products use the standard OpenPilot footprint, and hence has the same dimensions and mounting holes as the OpenPilot CC. CC3D, Revo, GPS, OSD and PipX boards.
Ports
Servo 1-6: These are the PWM outputs that go to servos or electronic speed controllers (ESCs). Power for the flight controller is typically supplied through these headers from only one of the ESCs, but in most cases, all the servo wires can be left connected. Cutting the pin from servo wires is highly discouraged. If you feel you must disconnect three of the hot wires, use some shrink tube or electrical tape to insulate the removed pin (you may need that positive voltage at a later date!). The positive (Vcc) and negative (Gnd) pins are indicated on this diagram and the board. In rare cases, you may need to also disconnect the ground pin if your ESCs are creating ground loop problems (indicated by a general weirdness in setup). (see the CopterControl - CC3D -Atom Hardware Setup page, Power section, for instructions on how to remove and insulate the extra pins)
Servo output pin layout
Outside --> ground
Middle --> 5V - 8.4V
Inside --> signal
Flexi-IO PortThe receiver port can act as an input or output port depending on the configuration which is set in the Hardware Settings. Configuring the receiver port as an output port allows the user to assign more output channels then the 6 standard servo outputs.
PWM -vs- PPM RecieversPlease be aware that not all receivers can be configured to use a PPM output. It is the user's responsibility to research this feature in regards to the desired receiver they wish to use for PPM and ensure it can be used as such. Many hours of frustration can occur while trying to troubleshoot why you can't get your radio to connect to the board with PPM if using a receiver than isn't designed with that feature! Simply make sure the receiver can do it before trying to set it up that way.
MainPortJST-SH 4-pin.
This is a serial USART whose baud rate can be adjusted through the GCS. Optionally, Futaba S.Bus receiver, Spektrum/JR satellite receiver or GPS can be mapped to the MainPort. Default configuration is Telemetry for connecting an RF modem.
FlexiPortJST-SH 4-pin.
The function of this port also depends on the configuration and can be configured for I2C or Serial. The default configuration doesn't use this port, but it can be used for Telemetry, GPS, Spektrum satellite receivers (all working), and other I2C peripherals (under development).
RF SocketAntenna connection socket for on-board OPLink modem.
Pwr Sen/Sonar PortJST-SH 4-pin.
This port can be configured to accommodate an Autopilot current sensor and a low cost Sonar sensor such as the HC-SR04. It can also be used as a general purpose input/output port or as a one or two channel analog input port.
Please note that the output rate on the output channels from the Flexi-IO Port cannot be set individually. If servos are connected to this outputs, you must ensure that they can work with the defined output rate for the bound channel. E.g. if you choose a high output rate to support an octocopter configuration, the update rate from the output channels from the ReceiverPort are bound to the update rate from channels 5 & 6. In this case, you cannot connect analog servo's to these outputs since an analog servo only supports an output rate of 50Hz..
Package included:
1 x OpenPilot CC3D Revolution Flight Controller with case
4 x connection cable
1 x 4pin cable
1 x antenna

Feedback
We would be very grateful to leave you some comments when you receive your article. We do our best to provide the best possible service, but if for any reason you are unhappy with something, please contact us before leaving a negative answer and we will do our best to solve your problem.

MERCI DE CHOISIR D'ACHETER AVEC NOUS